Relate Product for This Article :
GermGuardian AC4825 22” 3-in-1 Full Room Air Purifier, True HEPA Filter, UVC Sanitizer, Home Air Cleaner Traps Allergens, Smoke, Odors, Mold, Dust, Germs, Pet Dander, 3 Yr Warranty Germ Guardian
Controlling the temperature in your home is a big job that can be handled by several appliances, but the most common is the HVAC (Heating, Ventilation and Air Conditioning) system. The HVAC is a centralized air treatment system that comes in two cabinets. The condensing system is mounted outside the home so the collected heat can be released outdoors. The furnace and air exchange will be positioned inside the home to avoid loss of treated air. Common installation locations include the attic or basement as long as the air ducts can reach every room.
Experts in Heating And Air in Wichita Kansas will tell you that the best way to get the most out of your HVAC system is routine maintenance. Manufacturers suggest servicing the air conditioner in the early spring before a heavy load is placed on the appliance and the furnace in the fall before it is first used. Maintenance should include cleaning the system, testing the electronics and generally verifying its fitness for the job. For example, the furnace’s burning chamber needs to be cleaned on a yearly basis before the unit is used. This is because dust and lint can accumulate inside this area. This stuff can be very flammable and may cause a fire if not removed.
The AC works by compressing a refrigerant that is cycled through a couple of coils. As the refrigerant is compressed, it enters a state change which helps it to collect heat. This heat is picked up through the evaporator coil and carried outside the building where it is released into the atmosphere. Unfortunately, this cycle puts a lot of pressure on the condensing unit which is one of the most likely components to fail. When the condenser is replaced, the HVAC specialist must remove all the refrigerant, swap out the condensing unit and fill the system again. Refrigerant doesn’t break down so the technician will probably use the original coolant from your AC and any additional coolant to ensure it is charged properly.